UNI 2000 modular screens

Attachment is easy with our tried and tested tongue-and-groove connector system. The polyurethane adapter strip protects the longitudinal bar against wear and forms the groove to receive the screen components. The screen components have the appropriate tongue, likewise of polyurethane, cast onto them. It takes very little effort to insert the screens into the adapter strips and so prevent them from vibrating.

This is best achieved by the use of our side wear guard strip with its Jordahl profile and adapter:

• The screen panel can be fitted and demounted without demounting the sidebar.
• Screened material cannot be conveyed over the front end and damage the screening machine.
• The sidebar cannot become detached from the side wall, thus damage is prevented.
• The Jordahl profile enables the side strip bolt connections to be individually positioned.
• No support and wedge brackets are required on the screening machine.
• Side fastening using wedge strips and wedges is possible.
• Side wear guard strips can be provided with dewatering holes.

Because of the considerably narrower blind zone on the UNI 2000 this system offers a significantly larger open screen area than any other commercially available modular screens, which use standard longitudinal bars.
Offsetting of components can therefore largely be dispensed with.

It is possible to cast an additional adapter strip directly into the upper side of the screen components. By fitting an adapter strip, a further screening deck can thus be subsequently mounted onto the existing screening deck.
This enables fitting space and cost to be saved when designing a new screening machine.
Instead of a further screening deck, it is also possible to fit impact bars, for example, into these adapters.